Information about our products

Extremely bite resistant!

Mard Reap baits are almost as durable as a hardbait, but with the characteristics of a softbait.

The ultra-durable rubber has tremendous cut and tear resistance.
The material of all Mard Reap Swimbaits is a special elastomer that is free of toxic plasticizers and PVC plastisol. It hardly slits through predator teeth and lasts dozens of times longer than conventional rubber fish material.

Despite this, we recommend using the baits only for "common" fishing use.

Environmentally friendly

Mard Reap baits are almost as durable as a hardbait, but with the characteristics of a softbait.

The materials are free from toxic plasticizers, phthalates, lead and PVC. Enormous durability and the materials used contribute to more environmental friendliness.

Our baits are completely produced in Austria. Short transport routes, as well as the production in Austria help to achieve a better CO2 balance.

Excellent catch results

Products from Fischer for fishermen with head and passion.

Additional information

Bait storage info

The rubbers can be stored among themselves. They do not stain each other.

Please do not store with rubber baits from other manufacturers! The plasticizers leaking from the PVC rubber baits dissolve the Mard Reap elastomer plastic!

The baits are best stored in the original blister packaging or in a crate/box large enough. The baits must not be stored crumpled. We recommend a box without intermediate compartments or a large bait box with 4 or 2 divisions. A household storage box, bucket or lure bucket is also suitable. The storage box does not have to be a special plastic like other products.

Never store in a very hot environment. E.g.: black bait boxes in direct sun, storage in closed containers in very hot car or boat(under persening), etc. Improper storage may cause deformation of the rubber.

Running depths

Mard Reap baits are almost as durable as a hardbait, but with the characteristics of a softbait.

These specifications are always difficult to make. It depends on the length of the line to the bait and the thickness of the line. The specifications for the Hybrid Swimbaits 3m (19cm Swimbait), 5m (26cm Swimbait) and 8m (34cm Swimbait) are given with a setup of 20 meters of fluocarbon leader in 0.45mm and knotted braided 0.25mm line on 30m length. Braided lines make more drag in the water, but can be chosen thinner than monofilament lines. Less line length also means less running depth. Line lengths over 50 meters cause a strong buoyancy of the line due to the forward movement and the lure runs only minimally deeper, because the line makes a bow in the water. This applies mainly to lures with a diving vane.

Mard Reap Hybrid Swimbaits

The appearance, the swimming behavior and the materials used make the Mard Reap Hybrid Swimbait a unique catching machine.
An exclusive predator lure designed primarily for trolling.
The 19 and 26 cm verison can also be used well for spin fishing.

Details
Size19cm26cm34cm
Weight~45g~110g~220g
Speed3 - 5 km/h3 - 5 km/h3 - 5 km/h
Diving depth3m (with 30m cord)5m (with 30 m cord)8m (with 30m cord)

The Mard Reap Hybrid Swimbait is made of TPE and can be stored together with all Mard Reap products but please never in direct contact with rubbers of other manufacturers that are made of Plastisol PVC!

The color tone and glitter flakes may vary slightly from the picture. The rubber may occasionally have flow lines or small dents (sink marks) during production.
Only while stocks last.

If the bait is deformed by heat, you can try to bring it back into shape with heat. However, this should only be an absolute emergency solution.

WARNING!!! At your own risk - Work very carefully - Heat only the rubber, never the hard head.
Otherwise the air in the head will expand greatly and damage it!

Heat the rubber properly with a hot air blower or hot water!
Heating the rubber takes some time and of course depends on the bait size and thickness. It must be warmed through and through to at least 50 ºC. Then hang straight or quench in cold water.

If the head is detached from a hybrid swimbait, it can be easily glued back on with super glue. This works very well. Please use only a little glue.
If the bait feels sticky after the emergency surgery, a little powder helps 😉.

The Fella Deluxe Shads (are no longer produced.) have no diving vane and can be fished at almost any depth. By changing the speed as well as the line length, the running depth of the bait then also changes.

As a guideline, we can give the following.

Fella Deluxe Shad 23cm

SpeedPrefix 0.45Running depth
3km/h30m4,8m
3km/h15m3,5m
3,5km/h30m4,3m
3,5km/h15m3,3m

Fella Deluxe Shad 18cm

SpeedPrefix 0.45Running depth
3km/h30m3m
3km/h15m2,6m
3,5km/h30m2,8m
3,5km/h15m2,3m